Essential oil-loaded biopolymeric particles on food industry and packaging: A review.

Essential oils (EOs) are liquid extracts derived from various parts of herbal or medicinal plants. They are widely accepted in food packaging due to their bioactive components, which exhibit remarkable antioxidant and antimicrobial properties against various pathogenic and food spoilage microorganisms. However, the functional efficacy of EOs is hindered by the high volatility of their bioactive compounds, leading to rapid release. Combining biopolymers with EOs forms a complex network within the polymeric matrix, reducing the volatility of EOs, controlling their release, and enhancing thermal and mechanical stability, favoring their application in food packaging or processing industries. This study presents a comprehensive overview of techniques used to encapsulate EOs, the natural polymers employed to load EOs, and the functional properties of EOs-loaded biopolymeric particles, along with their potential antioxidant and antimicrobial benefits. Additionally, a thorough discussion is provided on the widespread application of EOs-loaded biopolymers in the food industries. However, research on their utilization in confectionery processing, such as biscuits, chocolates, and others, remains limited. Further studies can be conducted to explore and expand the applications of EOs-loaded biopolymeric particles in food processing industries.

Development of curcumin-containing polyvinyl alcohol/chitosan active/intelligent films for preservation and monitoring of Schizothorax prenanti fillets freshness.

Active/intelligent films for the preservation and monitoring of Schizothorax prenanti fillets freshness were prepared by combining curcumin (CUR) with polyvinyl alcohol/chitosan (PVA/CS) matrix. SEM images showed that the CUR with a maximum content of 1.5 % (w/w) was evenly distributed in the composite matrix. The addition of CUR did not affect the chemical structure of PVA/CS matrix, as confirmed by FTIR investigation. When 1.5 % (w/w) CUR was added, the water vapor barrier property, tensile strength and antioxidant activity of the composite film were the best, which were 5.38 ± 0.25 × 10-11 g/m·s·Pa, 62.05 ± 1.68 MPa and 85.50 ± 3.63 %, respectively. Water solubility of PVA/CS/CUR-1.5 % film was reduced by approximately 27 % compared to PVA/CS film. After adding CUR, the antibacterial properties of the composite film increased significantly. Although the addition of CUR reduced the biodegradability of PVA/CS film, the PVA/CS/CUR-1.5 % film degraded >60 % within 5 weeks. By measuring pH, weight loss, total volatile base­nitrogen (TVB-N), thiobarbituric acid reactive substances (TBARS), and total viable counts (TVC), the preservation effect of the composite films on the fish freshness was evaluated. The fish shelf life treated by PVA/CS/CUR-1.5 % film expanded from 3-6 days to 12-15 days at 4 °C. In addition, when PVA/CS/CUR-1.5 % film was used to monitor the fish freshness, it exhibited clear color fluctuations, from yellow to orange and to red, corresponding to first-grade freshness, second-grade freshness, and rottenness of the fish, respectively. As a result, the films can be successfully used for Schizothorax prenanti fillets preservation and deterioration monitoring.

Recent advances in the fabrication of pH-sensitive indicators films and their application for food quality evaluation.

Over a few decades, anthocyanin (ACN)-based colorimetric indicators in intelligent packaging systems have been widely used to monitor the freshness or spoilage of perishable food products. Most of the perishable food products are highly susceptible to enzymatic/microbial spoilage and produce several volatile or nonvolatile organic acid and nitrogenous compounds. As a result, the natural pH of fresh foods significantly changes. Fabrication of CAN-based colorimetric indicators in intelligent packaging systems is an advanced technique that monitors the freshness or spoilage of perishable foods based on the display of color variations at varying pH values. This study focuses on the advancement of pH-sensitive indicators and extraction of colorimetric indicators from commercially available natural sources. Moreover, the fabrication techniques and widespread industrial applications of such indicators have also been discussed. In addition, readers will get information about the color-changing and antioxidant mechanisms of ACN-based indicator films in food packaging.

Electrospun nanofibers food packaging: trends and applications in food systems.

Food safety is a bottleneck problem. In order to provide information about advanced and unique food packaging technique, this study summarized the advancements of electrospinning technique. Food packaging is a multidisciplinary area involving food science, food engineering, food chemistry, and food microbiology, and the interest in maintaining the freshness and quality of foods has grown considerably. For this purpose, electrospinning technology has gained much attention due to its unique functions and superior processing. Sudden advancements of electrospinning have been rapidly incorporated into research. This review summarized some latest information about food packaging and different materials used for the packaging of various foods such as fruits, vegetables, meat, and processed items. Also, the use of electrospinning and materials used for the formation of nanofibers are discussed in detail. However, in food industry, the application of electrospun nanofibers is still in its infancy. In this study, different parameters, structures of nanofibers, features and fundamental properties are described briefly, while polymers fabricated through electrospinning with advances in food packaging films are described in detail. Moreover, this comprehensive review focuses on the polymers used for the electrospinning of nanofibers as packaging films and their applications for variety of foods. This will be a valuable source of information for researchers studying various polymers for electrospinning for application in the food packaging industry.

Research progress on antimicrobial materials for food packaging.

Microbial contamination is an utmost cause of food spoilage. Antimicrobial agents are used to treat microbial diseases in food. They also serve food packaging industry, as they are used for the formation of antimicrobial packaging films which maintain the structure, texture, color, and nutrition value of food. Due to ever growing population, the demands of food are also rising. There is need to stop food wastage and to prevent spoilage. Most of the food is spoiled during harvesting, transportation, and distribution. This is a serious problem to overcome. Adding antibacterial agents is the most convenient way to reduce food spoilage and contamination. To support the characteristics and properties of antibacterial materials, different modifications are performed in the field of food packaging, which is one of the most demanding techniques for food preservation. This review will summarize the research about antimicrobial agents, with an emphasis on recent findings, to highlight the importance of new developments in this field. Concepts of antimicrobial packaging with a focus on antibiotics and antibacterial agents are discussed briefly in this review, along with the different types of food packaging and applications of antimicrobial packaging. Synthetic and natural antimicrobial materials are described. In summary, this article will explain the importance of antibacterial agents and their use in food packaging industry. Furthermore, readers will get good information about natural antibacterial polymers which were extensively used in past few decades. Subsequently, different innovations should be done to control food spoilage and wastage to ensure food safety. Food packaging is a sole element that helps to provide safe and secure food for all.

Recent advances in cyclodextrin-based films for food packaging.

Cyclodextrins are garnering increasing attention because they offer several benefits. For instance, cyclodextrins can form several complexes and supramolecular structures not only for food packaging but also for applications in other fields of science. In this review, we discussed the physical and chemical properties of cyclodextrins and the mechanism of their inclusion complex formation. The use of cyclodextrins in various types of food packaging is elaborated upon. We also explain the effects of cyclodextrins on the packaging of fruits, vegetables, meat, fish, and processed foods. Furthermore, some feasible suggestions for future applications are provided. In addition to the positive attributes of cyclodextrins, there are some limitations and drawbacks, which are discussed briefly in this review. In summary, this review can serve as a guide for researchers exploring cyclodextrins for the development of various packaging films.

In vitro digestion of sodium alginate/pectin co-encapsulated Lactobacillus bulgaricus and its application in yogurt bilayer beads.

The purpose of this study was to prepare sodium alginate (SA)/pectin (PE) hydrogel microspheres using the extrusion method to encapsulate Lactobacillus bulgaricus. Microscopic observation showed that the beads were spherical with a smooth and uniform surface. For microspheres with a diameter range of 140-156 µm, the encapsulation efficiency reached 85.67%. After simulating saliva, gastric juice, and intestinal juice, the activity of the microcapsules was estimated to be 5.78 × 104 log colony forming unit (CFU)/mL. These data show that the use of SA and PE encapsulated probiotics exhibit enhanced viability. In addition, double-layer beads containing probiotic microspheres and yogurt were prepared, and physical and chemical analysis was performed using scanning electron microscopy, Fourier-transform infrared spectroscopy, and differential scanning calorimetry. Texture and sensory property analysis revealed that the beads had good elasticity, chewiness, and high commercial value. Collectively, these findings indicate that SA and PE can be used for the encapsulation, protection, and gastrointestinal delivery of probiotics. Moreover, these microcapsules exhibit good stability in vitro and improve yogurt characteristics by increasing the survival rate of encapsulated probiotics, thus demonstrating their commercial application potential.

Effects of ultrasonic treatment and homogenization on physicochemical properties of okara dietary fibers for 3D printing cookies.

This paper presents a means to modify the attributes of okara fiber using ultrasonic and high-speed shearing treatment. The results of scanning electron microscopy and differential scanning calorimetry reveal that the modified okara fiber demonstrates small particle size and high thermal stability. When the 500 W-15,000 rpm combination is used for okara-fiber treatment, the latter exhibits excellent swelling (SC) as well as water- and oil-holding capacities. When 6% of modified okara fiber is added to the dough, the resulting cookies demonstrate the best printing performance. Subsequently, the printing parameters can be optimized to obtain the best filling rate of 30%. The corresponding nozzle diameter and printing speed equal 0.8 mm and 50 mm/s, respectively. Finally, the 3D-printed cookies containing okara fiber are compared against those commonly available in the market via sensory evaluation. As observed, the 3D-printed cookies were more acceptable to people. Therefore, the addition of the okara dietary fiber to the cookie dough not only improves the okara utilization rate but also increases the dietary-fiber content in the cookie, thereby alleviating the occurrence of obesity in modern society.

Development and characterization of aldehyde-sensitive cellulose/chitosan/beeswax colorimetric papers for monitoring kiwifruit maturity.

In this study, we developed an in-package colorimetric paper to monitor the ripeness of kiwifruit by detecting the release of aldehydes. Strongly hydrophobic composite films were prepared using chitosan as the matrix and beeswax as an additive. A piece of cellulose paper containing methyl red and bromocresol violet as color indicators was heat-sealed between two hydrophobic films to protect the indicators from the effects of fruit respiration and transpiration. The nucleophilic addition reaction between aldehydes and OH- (Cannizzaro reaction) changes the pH in the paper and triggers a color change in the indicators. As the kiwifruit ripens, the colorimetric paper changes from bluish-purple to dark red and then gradually to red. A mobile phone application was further used to measure the RGB values and link them to kiwifruit ripeness. This intelligent paper can be used for the accurate and convenient monitoring of produce in real time.

Preparation of polylactic acid/TiO2/GO nano-fibrous films and their preservation effect on green peppers.

Polylactic acid (PLA)/nano-TiO2(TiO2 NPs)/Graphene oxide (GO) nano-fibrous films were prepared by ultrasonic assisted electrostatic spinning technology, and the effects of TiO2 NPs:GO mass ratio and ultrasonic power on film morphology and mechanical, thermal, barrier and antibacterial properties were investigated. The addition of TiO2 NPs and GO can significantly increase the tensile strength and elongation at the break of PLA nano-fibrous films, and improve the water barrier properties of the nano-fibrous films. The antibacterial experiment showed that the inhibition rates of the nano-fibrous films against Escherichia coli and Staphylococcus aureus after 24 h exposure to UV irradiation reached 94.4 ± 1.8% and 92.6 ± 1.7% At the same time, the fresh-keeping packaging experiment of green peppers at room temperature, through the determination of hardness, soluble solids, chlorophyll content to determine the degree of decay of green pepper, it showed that PLA/TiO2 NPs/GO nano-fibrous films can better maintain the sensory quality of green peppers, delay the rate of spoilage of green peppers, and prolong the preservation period of green peppers.

Preparation, characterization, and 3D printing verification of chitosan/halloysite nanotubes/tea polyphenol nanocomposite films.

In this study, chitosan/halloysite nanotubes/tea polyphenol (CS/HNTs/TP) nanocomposite films were prepared by the solution casting method. The scanning electron microscopy (SEM) result showed that the nanocomposite film with a CS/HNTs ratio of 6:4 and a TP content of 10% (C6H4-TP10) had a relatively smooth surface and a dense internal structure. The water vapor barrier property of the nanocomposite film was improved due to the tortuous channels formed by the HNTs. However, the swelling degree and water solubility of the nanocomposite films were decreased. The nanocomposite films have a good antioxidant capacity. Antibacterial experiments showed that the C6H4-TP10 nanocomposite film had certain inhibitory effects on the growth of both E. coli and S. aureus. In addition, we used 3D printer to verify the printability of the optimal formulation of the film-forming solution. Overall, this strategy provides a simple approach to construct promising natural antioxidants and antibacterial food packaging.

Enhanced photocatalytic degradation of organic dyes by ultrasonic-assisted electrospray TiO2/graphene oxide on polyacrylonitrile/ß-cyclodextrin nanofibrous membranes.

Polyacrylonitrile (PAN)/ß-cyclodextrin (ß-CD) composite nanofibrous membranes immobilized with nano-titanium dioxide (TiO2) and graphene oxide (GO) were prepared by electrospinning and ultrasonic-assisted electrospinning. Scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), transmission electron microscopy (TEM), and X-ray diffraction (XRD) confirmed that TiO2 and GO were more evenly dispersed on the surface and inside of the nanofibers after 45 min of ultrasonic treatment. Adding TiO2 and GO reduced the fiber diameter; the minimum fiber diameter was 84.66 ± 40.58 nm when the mass ratio of TiO2-to-GO was 8:2 (PAN/ß-CD nanofibrous membranes was 191.10 ± 45.66 nm). Using the anionic dye methyl orange (MO) and the cationic dye methylene blue (MB) as pollutant models, the photocatalytic activity of the nanofibrous membrane under natural sunlight was evaluated. It was found that PAN/ß-CD/TiO2/GO composite nanofibrous membrane with an 8:2 mass ratio of TiO2-to-GO exhibited the best degradation efficiency for the dyes. The degradation efficiency for MB and MO were 93.52 ± 1.83% and 90.92 ± 1.52%, respectively. Meanwhile, the PAN/ß-CD/TiO2/GO composite nanofibrous membrane also displayed good antibacterial properties and the degradation efficiency for MB and MO remained above 80% after 3 cycles. In general, the PAN/ß-CD/TiO2/GO nanofibrous membrane is eco-friendly, reusable, and has great potential for the removal of dyes from industrial wastewaters.

Improving nisin production by encapsulated Lactococcus lactis with starch/carboxymethyl cellulose edible films.

In this study, Lactococcus lactis was embedded in a film of corn starch (NS) and carboxymethyl cellulose (CMC) prepared using a casting method. At a CMC:NS ratio of 5:5, the composite film had the best comprehensive properties. Scanning electron microscopy images clearly showed that L. lactis was effectively embedded. The film with 1.5 % L. lactis showed the best performance and the lowest water vapor transmission rate (5.54 × 10-11 g/m s Pa. In addition, the edible film retained a viable count of 5.64 log CFU/g of L. lactis when stored at 4 °C for 30 days. The composite film with 1.5 % L. lactis showed the highest release of nisin (3.35 mg/mL) and good antibacterial activity against Staphylococcus aureus (53.53 %) after 8 days. Therefore, this edible film is a viable alternative antimicrobial strategy for the active packaging of foods containing low moisture content.

Optimization, characterization and evaluation of papaya polysaccharide-corn starch film for fresh cut apples.

In this study, we prepared corn starch (CS) and papaya polysaccharide (PPs) films using the solution casting technique. A Box-Behnken experimental design was used to determine the effect of ethanol concentration, extraction duration, and material concentration during PPs extraction. The resulting films were characterized in terms of structural changes, physical, optical, mechanical, Fourier-transform infrared (FTIR) spectroscopy, and thermal properties. The results show that PPs-CS composite films have good antioxidant and moisturizing properties and general antibacterial performance. These results revealed that after adding PPs, the films exhibited a significant increase in swelling and tensile strength, while depicted a reduction in thickness, transparency, and solubility. SEM images revealed that PPs and CS are highly compatible; moreover, FTIR spectroscopy showed that intermolecular hydrogen bonding existed between CS and PPs, forming a compact film structure. Finally, the incorporation of PPs and CS influenced the shelf-life of fresh cut apples, with the edible film incorporated with PPs positively improving sensory acceptance of combined materials.

Effects of Ultrasonication Time on the Properties of Polyvinyl Alcohol/Sodium Carboxymethyl Cellulose/Nano-ZnO/Multilayer Graphene Nanoplatelet Composite Films.

Ultrasonication-assisted solution casting was used to prepare polyvinyl alcohol (PVA)/sodium carboxymethyl cellulose (CMC)/nano-ZnO/multilayer graphene nanoplatelet (xGnP) composite films; the performances (mechanical properties, water vapor permeability (WVP), biodegradability and antibacterial activity) of these films were investigated as a function of the ZnO NPs:xGnP mass ratio and ultrasonication time. Intermolecular interactions among ZnO NPs, xGnP and the PVA/CMC matrix were shown to improve WVP, while X-ray diffraction and scanning electron microscopy analyses revealed that the internal reticular structure of ultrasound-treated PVA/CMC/ZnO NPs/xGnP composite films was in a fluffier state than that of the untreated composite films and the PVA/CMC film. The incorporation of ZnO NPs and xGnP into the composite film reduced its tensile strength and elongation at break, and increased antibacterial activity and biodegradability. In addition, we carried out the experiment of strawberry preservation and measured weight loss ratio, firmness, content of total soluble solids and titration acid. Finally, the composite film of 7:3 had the best preservation effect on strawberries. Thus, the obtained results paved the way to develop novel biodegradable composite films with antimicrobial activity for a wide range of applications.

Long-Term Antibacterial Effect of Electrospun Polyvinyl Alcohol/Polyacrylate Sodium Nanofiber Containing Nisin-Loaded Nanoparticles.

Response Surface Methodology (RSM) was used to assess the optimal conditions for a Water/Oil/Water (W/O/W) emulsion for encapsulated nisin (EN). Nano-encapsulated nisin had high encapsulation efficiencies (EE) (86.66 ± 1.59%), small particle size (320 ± 20 nm), and low polydispersity index (0.27). Biodegradable polyvinyl alcohol (PVA) and polyacrylate sodium (PAAS) were blended with EN and prepared by electrospinning. Scanning electron microscopy (SEM) revealed PVA/PAAS/EN nanofibers with good morphology, and that their EN activity and mechanical properties were enhanced. When the ultrasonication time was 15 min and 15% EN was added, the nanofibers had optimal mechanical, light transmittance, and barrier properties. Besides, the release behavior of nisin from the nanofibers fit the Korsemeyer-Peppas (KP) model, a maximum nisin release rate of 85.28 ± 2.38% was achieved over 16 days. At 4 °C, the growth of Escherichia coli and Staphylococcus aureus was inhibited for 16 days in nanofibers under different ultrasonic times. The application of the fiber in food packaging can effectively inhibit the activity of food microorganisms and prolong the shelf life of strawberries, displaying a great potential application for food preservation.

Cassava starch/carboxymethylcellulose edible films embedded with lactic acid bacteria to extend the shelf life of banana.

In this study, two different species of lactic acid bacteria (LAB) (Lactobacillus plantarum and Pedocococcus pentosaceus) with high exopolysaccharide (EPS) yield were selected from a pickled water. Further, edible films based on cassava starch (CS) were developed containing LAB, and sodium carboxymethylcellulose (CMC). After addition of probiotics, the antioxidant activity of the composite film was significantly enhanced. Further, as the probiotic content increased, the antioxidant activity continuously increased. Moreover, L. plantarum showed uniform distribution in the CS/CMC matrix, forming a denser structure, which effectively blocked the penetration of water molecules and exhibited ultraviolet protection. Finally, due to the intermolecular interaction between probiotics and the CS/CMC matrix, the water vapor and light transmission rates were reduced, effectively blocking water and light to prevent lipid oxidation deterioration in food packaging. Banana shelf life has qualitatively improved with 2% LAB added composite film and its application in food packaging has been affirmed.

Investigation of Ultrasonic Treatment on Physicochemical, Structural and Morphological Properties of Sodium Alginate/AgNPs/Apple Polyphenol Films and Its Preservation Effect on Strawberry.

An antibacterial and anti-oxidation composite film was prepared by a casting method using sodium alginate (SA) and apple polyphenols (APPs) as the base material and glycerol as the plasticizer. Silver nanoparticles (AgNPs) were deposited by ultrasonic-assisted electrospray method. The degree of influence of the addition ratio of SA and AgNPs and different ultrasonic time on the mechanical properties, barrier properties, optical properties, and hydrophilicity of the composite film was explored. The composite films were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) and scanning electron microscopy (SEM). The results showed that the SA: AgNPs ratio of 7:3 and the ultrasonic time for 30 min have the best comprehensive performance, and SA/AgNPs/APP films showed the lowest water vapor permeability value of 0.75 × 10-11 g/m·s·Pa. The composite film has good strength and softness, with tensile strength (TS) and elongation at break (E) at 23.94 MPa and 29.18%, respectively. SEM images showed that the surface of the composite film was smooth and the AgNPs' distribution was uniform. The composite film showed broad antibacterial activity, and the antibacterial activity of Escherichia coli (92.01%) was higher than that of Staphylococcus aureus (91.26%). However, due to the addition of APP, its antioxidant activity can reach 98.39%, which has a synergistic effect on antibacterial activity. For strawberry as a model, the results showed that this composite film can prolong the shelf life of strawberries for about 8 days at 4 °C, effectively maintaining their storage quality. Compared with the commonly used PE(Polyethylene film) film on the market, it has a greater fresh-keeping effect and can be used as an active food packaging material.

Development and optimization of dynamic gelatin/chitosan nanoparticles incorporated with blueberry anthocyanins for milk freshness monitoring.

In this study, we prepared gelatin and chitosan as wall materials, and composites with a controlled release capability in a weak acidic environment were synthesized for loading and protecting anthocyanins. Fourier-transform infrared spectroscopy and scanning electron microscopy were used to assess the properties of the nanoparticles. The loading efficiencies and oxidation resistances of the proposed substances were measured. Under optimal conditions, the anthocyanins exhibited a loading efficiency of 83.81 %, and suitable long-term storage capacity at room temperature with a retention rate of ∼50 % after 15 d. When the nanoparticles were used for detecting the milk freshness, spoiled milk exhibited a reddish color, whereas the color of fresh milk did not change. Moreover, these nanoparticles exhibited a stable chroma in milk for 0-16 h. Therefore, the proposed pH responsive nanoparticles can provide a possibility for the dynamic monitoring of milk quality changes, or provide some reference value for future related research.